- A minimum of 80% of the vehicle length (except the length of the cab must be marked. In special cases, this can be reduced to 60% for difficult applications or 40% for particularly difficult applications.
- The lower line of the marking tape must be placed at a minimum of 250 mm from the ground, and at a maximum height of 1500 mm. It can be extended in special cases to 2500 mm.
- The length of the upper corner markings must be a minimum of 250 mm. The upper corner markings must be applied as high as possible, but 400 mm from the upper extremity of the vehicle.
- In cases where marking the top corner is not possible due to the construction of the vehicle, marking in the line itself is permitted.
Full rear contour marking is required unless this is impossible due to vehicle construction. - The maximum height requirements for the lower horizontal line are the same as for the side markings (see above).
Reviews
There are no reviews yet.