- Minimum 80% of vehicle length (excluding cab length must be marked. In special cases, this may be reduced to 60% for difficult applications or 40% for particularly difficult applications.
- The bottom line of the marking strip shall be placed at least 250 mm above the ground, and at a maximum height of 1500 mm. It may be extended in special cases to 2500 mm.
- The length of the upper corner markings shall be a minimum of 250 mm. Upper corner markings shall be applied as high as possible, but not more than 400 mm from the top end of the vehicle.
- In cases where top corner marking is not possible due to the construction of the vehicle, in-line marking itself is permitted.
A full rear contour marking is required unless this is impossible due to the construction of the vehicle. - The maximum height requirements for the lower horizontal line are the same as those given for the side markings (see above).
Approved Reflective Tape – ECE 104, Yellow, 5 cm x 46 m
168,00 €
(4 in stock)
- The strips comply with ECE 104.
- Class C.
- Which colours should be used?
Yellow: Can be used in LATERAL and/or SPATE.
Red: can be used in the rear.
White: Can be used on the side.
4 in stock
Weight | 1,2 kg |
---|---|
Dimensions | 16,5 × 16,5 × 5 cm |
Width | 5 cm |
Length | 46 M |
Colour | Yellow |
Reviews
There are no reviews yet.